We offer an extensive range of calipers available with vernier, dial or digital displays. Including basic 75mm pocket caliper increasing in jaw depth and size to the extra large capacity of the 1000mm caliper. Along with a comprehensive range of special purpose calipers.

Please contact us if you have a special requirement. We are able to source from a wide selection of approved manufacturers.
  1. Part No:ME-CAL-DIAL-150
    Due in on 07/03/2019
    150mm Machine-DRO dial caliper with metric yellow face.
  2. Part No:ME-CAL-TU-150
    Due in on 07/03/2019
    0-150mm (6") digital calipers with a cylindrical pin jaw for measuring tube wall thickness.
  3. Part No:MEB-MW110-15DIP
    Please contact us for Stock Details
    Moore and Wright 150mm/ 6inch Waterproof IP67 Digital Caliper
  4. Part No:MEB-MWECP015D
    Moore and Wright Glass Reinforced Nylon Plastic Digital 150mm/ 6inch Caliper
  5. Part No:MEB-MW200-SET2I
    Moore and Wright Imperial Engineers Set - Dial Caliper, Micrometer, Rule
  6. Part No:ME-CAL-ARC-150
    150mm Arc Digital Calipers
  7. Part No:MEB-MW200-SET1I
    Moore and Wright Imperial Engineers Set - Vernier Caliper, Micrometer, Rule
  8. Part No:MEB-MW110-15DAS
    Moore and Wright Absolute Digital 150mm/ 6inch Caliper
  9. Part No:MEB-MW143-15I
    6 Inch Imperial Dial Caliper - Moore and Wright 143 Series
  10. Part No:ME-CAL-INT-150
    19-150mm (3/4inch-6inch) Digital Internal Caliper
  11. Part No:ME-CAL-OF-150
    The front jaw can slide up or down allowing measurement of stepped work piece.
  12. Part No:ME-CAL-CL-150
    Due in on 07/03/2019
    150mm (6") center pitch digital calipers with adjustable precision ground points. Allowing center pitch between holes, edge plane to hole center and outside measurements to be taken.
  13. Part No:MEB-MW110-15DDL
    Moore and Wright 150mm/ 6inch Digital Caliper
  14. Part No:ME-CAL-OPC-150
    Due in on 07/03/2019
    150mm Outside Point Digital Calipers
  15. Part No:MEB-MW110-15
    Moore and Wright Precision Vernier Caliper 150mm/ 6"
Please wait...