- The digital indicator has 50 mm (2") of plunger travel
- The operation of the plunger is parallel to the Horizontal LCD display.
- The display can be set to zero in any position, and switch between metric and imperial reading.
The digital indicator has 50 mm (2") of plunger travel. The operation of the plunger is parallel to the Horizontal LCD display. The display can be set to zero in any position, and switch between metric and imperial reading. There is also an external data output interface via data cable (not supplied).
The indicator has a mounting lug with two 6mm diameter fixing holes. One in the front and the other in the side of the lug. On the under side is a thumb screw to lock the indicator. A mounting stem is also supplied which fits into the lug to provide another mounting option.
Setting work pieces in a lathe chuck.
Lathe carriage digital stop/readout.
Setting work piece parallel to quill/vertical travel.
General purpose indicator.
Included with the indicator: storage case, mounting stem, spare battery and Instructions.
Measuring range; 50mm
Plunger force ;≤3N
Resolution: 0.01mm (0.0005")
Battery: 1.55V SR44
Working Temperature: 0 ~ +40C